MATERIALS SPECIFICATIONS

03/04/2017

 

 

MATERIAL SPECIFICATION

 

 

 

EQUIVALENT TABLE

 

N0 EQUIVALENT PURPOSE WHAT DIFFERENT ?
1 ASTM A36 JIS G3101 - SS400   APPLY FOR COVERS CARBON SHAPES, HOT ROLLED, ANCHOR BOLT.  ASTM A-36
- max 0.25% C
- max 0.4% Si
- max 0.05% S
- max 0.04% P
Fu : 400-550 Mpa
Fy : 250 Mpa
 JIS G3101-SS400
- max 0.21% C
- max 0.1% Si
- max 0.05% S
- max 0.05% P
Fu : 400-510 Mpa
Fy : 245 Mpa
 
2 ASTM A-572 GR50 JIS G3106 - SM490 Q 345B APPLY FOR HIGH STRENGTH LOW ALLOY STRUCTURAL STEEL SHAPES, BUILT UP SECTION

ASTM A-572 GR50

- max 0.23%C

- max 0.4% Si

- max 1.35% Mn

- max 0.04% P

- max 0.05% S

Fu : min 450 Mpa

Fy : 345 Mpa

JIS G3106 - SM490

- max 0.2% C

- max 0.55% Si

- max 1.6% Mn

- max 0.035% P

- max 0.035% S

Fu : 490-610 Mpa

Fy : 365 Mpa

Q 345

- max 0.2% C

- max 0.55 Si

- max 1.6% Mn

- max 0.035% P

max 0.04% S

Fu: 490-675Mpa

Fy: 345 Mpa

3 ASTM A-653 GR50 AS-1397 G350 JIS G3302 -SGC 440 APPLY FOR COLDFORM (Z275)
 - SPECIFICATION FOR ZINC COATED/ ZINC ALLOY COATED
ASTM A-653 GR50
- Fy : 340 Mpa
- Fu : 450 Mpa
Triple spot test : 275g/m2 (both sides)
Single spot test : 235g/m2 (both sides)
AS-1397
- Fy : 350 Mpa
- Fu : 420 Mpa
Triple spot test : 275g/m2 (both sides)
Single spot test : 250g/m2 (both sides)
JIS G3302
- Fy : 335 Mpa
- Fu : 440 Mpa
Triple spot test : 275g/m2 (both sides)
Single spot test : 234g/m2 (both sides)
4 ASTM A-792 GR50 JIS G3321 AZ150   APPLY FOR PANEL
-SPECIFICATION FOR 55% AL-ZN ALLOY COATED
ASTM A-792 GR50
ALMOST SAME
JIS G3321 AZ150
ALMOST SAME
 
5 DIN 3066/EN-12385 REFER ASTM A-1023/ASTM A-603/ ASTM A-931   APPLY FOR CABLE BRACING, STEEL WIRE ROPES.
-SPECIFICATION ZINC-COATED WIRE ROPES
DIN 3066/EN-12385 CODE IS THE BEST ONE OF STEEL WIRE REFER ASTM A-1023/ASTM A-603/ ASTM A-931